What should I do if the ad uv printer has the following problems? Look at the "old driver" to give you a coup ~

In the advertising production industry, advertising printers are indispensable "artifacts". Although UV flatbed printers are simple to operate, they may encounter some problems for "novices" who are not skilled in operation, resulting in errors in print quality. How to solve this? Don't worry, these 3 common questions, Xiaobian will sort out for you~

One: print media

In the printing process of UV Flatbed Printer, the print quality of the screen may be wrong due to the failure of the nozzle, the adjustment of the height of the medium, etc., mainly due to the ink drop or ink leakage of the nozzle, or the distance between the nozzle and the material medium is too close, causing the nozzle to wipe. Through the surface of the media, damage the image quality. The printed material must be placed flat, which is much better for devices with suction devices. Of course, there is another reason why the printed material is too transparent or too thick. At this time, you need to reload the printing material to ensure that the surface is flat, and also to replace the opaque printing material.

 

Two: dripping phenomenon

There are occasional drops of ink during printing on a UV flatbed printer. This is usually because the filter in the air filter on the secondary ink tank is wet, resulting in poor ventilation. This may also be caused by fines such as fine hair and dust on the UV flatbed printer. The ink that is ejected will automatically drip when the dirt accumulates to a certain extent. To solve such problems, it is necessary to replace the air filter. At the same time, it is necessary to clean the nozzle with a special cleaning solution. A detailed inspection of the two edges of the light box cloth is required to see if there are any extra burrs. If there are burrs, It is simply processed with a lighter.

 

Three: data transmission problem

Maybe you will encounter a situation where the UV flatbed printer keeps flashing after transmitting the print data, even if the start button is pressed, the UV flatbed printer still cannot print. This is also a common print production failure that is difficult for an inexperienced operator to handle. It should be noted that if the UV flatbed printer performs an incorrect termination of printing during the printing process, even if the printing job is stopped, some residual print data will be transferred to the UV flatbed printer on the computer side, and the memory remains. With these print data, the data is invalid in the UV flatbed printer, the printing work can not be realized, and the subsequent print work cannot be performed normally.