Advantages of RFC small UV Flatbed Printer for cold light source curing
1. It adopts the latest technology RFC to concentrate the reflected UV light energy and high efficiency of light curing, which is conducive to the curing of the ink of the thick ink layer, which can completely cure the deep layer of the ink, quickly dry and avoid the air. The pollution of dust affects the printing effect.
Advantages of a small UV flatbed printer with a cold light source curing lamp: 1. It adopts the latest technology focusing reflector to concentrate the reflected UV light energy and high efficiency of light curing, which is conducive to the curing of the ink of the thick ink layer, which can completely cure the deep layer of the ink, quickly dry and avoid the air. The pollution of dust affects the printing effect. 2, the best mirror alumina board is selected, the reflectivity of uv cold light source is more than 90%, greatly improving the utilization of ultraviolet light and reducing energy consumption; unlike some small manufacturers, it is set with steel. Iron to deceive customers, not only has a short service life, but also has poor reflection efficiency, which causes the ink to not dry and solidify. 3. Since different inks are different in wavelength curing under ultraviolet light, it is necessary to match a special uv lamp. How to ensure the output of the rated full power of the uv lamp has become a top priority. On the selection of the transformer, our company uses the imported EU transformer, which has a long service life and is stable, which is more than 3 times the life of the ordinary transformer. 4, the design concept of the size and shape of the lampshade, this is also our patented technology. The light emitted by different power uv lamps is different. It is not simple to say that the light is irradiated on the printed matter. This involves the utilization and conversion rate of ultraviolet light. The perfect mold shape of the golden ratio makes UV The loss rate of light has dropped below 10%, and the corresponding utilization rate and conversion rate have reached 90%, which ensures the synchronization of UV frequency and the stability and long-term stability of the ink, so that you can print it right away. And it is deep, and the internal 95% is dry. Small UV flatbed printer active device UVLED light curing machine advantages: 1. It does not contain mercury and does not produce ozone. It is a safer and more environmentally friendly alternative to traditional light source technology. 2, cold light source, no heat radiation, the surface temperature of the illuminated product is low, solving the long-term thermal damage problem in optical communication and liquid crystal production. It is especially suitable for applications where liquid crystal edge sealing, film printing, etc. require a small temperature rise. 3. The calorific value is small, which can solve the problem that the mercury lamp printing equipment has a large amount of heat and is unbearable for the staff. 4, instant lighting, no need to preheat to instantly achieve 100% power UV output. 5, long life: the service life is more than 10 times that of the traditional mercury lamp curing machine, about 25,000 ~ 30,000 hours. 6, high energy, stable light output, uniform illumination effect, improve production efficiency. 7, can be customized effective irradiation area, length from 20mm to 1000mm. 8. The service life is not affected by the number of opening and closing. 9, low energy consumption, power consumption is only 10% of the traditional mercury lamp curing machine, can save 90% of electricity. 10. The maintenance cost is almost zero. The UVLED curing equipment saves at least 10,000 yuan/set of consumables per year. 
April 24, 2019
