Note! Don't do these things that hurt the printer head

The print head is very important for UV printers. The print head is a high-precision component. If it is damaged, there is basically no way to repair it. Therefore, pay attention to maintenance and maintenance during ordinary use. Many problems with the print head are caused by incorrect use and maintenance operations. Improper causes, the RFC summarizes some daily use misunderstandings, pay attention to the following things that must not be done to the nozzle.

1. Do not use inferior inks and cleaning fluids. Ink is a large amount of consumables. Some people use low-quality inks in order to save costs. They do not choose the ink specified by the manufacturer to cause irreparable losses due to blockage of the nozzles. The ink composition ratio of each manufacturer is different. If there are no special circumstances, do not replace it easily.

2. Do not clean the print head frequently. Some users worry that the print head is clogged and clean the print head frequently. This is a wrong approach. Not to mention the waste of ink. Frequent cleaning will cause some damage to the print head. The frequency of print head cleaning is generally recommended to be thorough one month. Once cleaned, you can't use a high-pressure air gun to clean it vigorously. If there is a problem, you must notify the manufacturer to arrange professional technicians to disassemble and clean up.

3. The nozzle can be cleaned by immersing it in the cleaning solution, but it cannot be soaked for a long time or the entire nozzle. The nozzle has many electronic components and the cleaning solution is corrosive. As long as the nozzle is immersed in the nozzle, the time can be controlled. 1-2 hours, the machine power must be turned off during cleaning to avoid short circuit.

4. Poor environment, indoor temperature is too high or too low or relatively humid. The poor operating environment of the UV Flatbed Printer has an impact on the service life of the machine parts. Although it is slight, it cannot be ignored, especially for the fine print head. In terms of components, the machine must be stable for a long time to provide a good production environment.

So to sum up, the correct usage and maintenance measures can increase the life of the nozzle. Some customers have feedback that the nozzle usage time has not reached the expectations, but please reflect on whether the machine is used correctly during the production process. If you need to know more about the nozzle, Please visit the RFC website to provide you with professional answers.